Click to Download Rules

Click to Download Rules

MAXC UTV Rules

Both classes are 0-1000cc

The following rules will only apply to Modified

1.      All vehicles must pass technical inspection prior to going to starting line. Failure to do so will result in DQ.

2.      All factory suspension a-arm, trailing arm pivot points must remain in stock location.

3.      No superchargers, turbos, nitrous or any other pressurization/injection type system will be allowed.

4.      All vehicles must have a fire extinguisher and it must be readily accessible to the driver. It must be mounted in with a quick release type mechanism.

5.      Race numbers will be a minimum of 8 inches tall with the specific color designation for the class. Number shall be readable from sides and back of each car.

6.      Aftermarket, well built, roll cages made for racing are recommended. No factory stock roll cages will be allowed. Factory cages will only be allowed if modified/reinforced and tied into rear bumper/frame at two points. Gusseting of the factory cage is highly encouraged.

7.      Metal roof panels are required.

8.      Lockable side protection doors must be mounted in a way as to not be able to pop open during racing. Factory doors with secondary locking mechanism are approved.

9.      Driver side window nets are required.

10.  Passenger side nets or passenger hand restraints are required.

11.  3” wide five point restraint system for both driver and occupant are required. The 5 point system must include an antisubmarine belt that is at least 2” wide.

12.  Full personal safety gear must be worn to include

1.      Fire retardant suits must be worn that cover from neck to ankles

2.      Helmets, gloves, goggles racing shoes or boots.

3.      Motorcycle type race gear will NOT be allowed as it is extremely flammable.

 

The following rules only apply to Sportsman class

1.      All vehicles must pass technical inspection prior to going to starting line. Failure to do so will result in DQ.

2.      All factory suspension a-arm, trailing arm pivot points must remain in stock location.

3.      The center cases of the motors must remain stock.

4.      No superchargers, turbos, nitrous or any other pressurization/injection type system will be allowed.

5.      All vehicles must have a fire extinguisher and it must be readily accessible to the driver. It must be mounted in with a quick release type mechanism.

6.      Race numbers will be a minimum of 8 inches tall with the specific color designation for the class. Number shall be readable from sides and back of each car.

7.      Factory Roll cages are allowed but not recommended. Aftermarket, well built, roll cages made for racing are recommended. If factory roll cage is used gusseting and supporting the factory cage at two points that go to rear bumper/frame are highly encouraged.

8.      3” wide five point restraint system for both driver and occupant are required. The 5 point system must include an antisubmarine belt that is at least 2” wide.

9.      Full personal safety gear must be worn to include:

1.      Fire retardant clothing must be worn that cover from neck to ankles

2.      Helmets, gloves, goggles racing shoes or boots.

3.      Motorcycle type race gear will NOT be allowed as it is extremely flammable.

 

 

2014 Season Schedule

maxc-2014-race-schedule-325

“Like” Us on Facebook

Featured Sponsors

Dreyer South Powersports

2013 MAXC Photos

Featured Video